Akubela RSAC-C1-R8 – Smart Control Module for home or commercial systems

SourceProtocolOutputTemperatureC
Humidity

Specification	Details
Model	RSAC-C1-R8
Power	12VDC/2A (Recommended)
Communication	RS-485
I/O ports	8 Signal Input Channels, 8 12V Output Channels, 8 Control Relays
Relay Capacity	16A per channel (resistive load), 500W per channel (capacitive load)
12V	250 mAh per channel
Operating	0 to 45°
Operational	0 to 95% non-condensing
Materials	PVC Plastic Material
Dimensions of the device	160 × 95.7 × 67 mm
Security	IP20
Installation	DIN rail mounting in distribution panels

Akubela Switch Actuator RS485 – Superior Enterprise Load Control
Communication and protocol
It is based on the RS485 interface, where you can activate the “Switch Actuator” function by setting the HyPanels settings so that the Connection Type is set to “akubela”.
It uses an efficient communication protocol within wired networks, reliable for long distances or environments with wireless interference.

Electrical Outlets Control
It typically has multiple relay outputs to control the on/off of electrical loads. The RSAC-C1-R8 model for example has 8 rail exits.
Each output can withstand current/device depending on the design specifications, making it suitable for lighting control, electrical supply, or small-medium appliances.

Tuning and Programming
The device is tuned via the HyPanel interface or from the RS485 settings panel in the system: RS485 must be activated and the connection type (“akubela”) must be selected to recognize the device as a switch adapter.
HyPanel supports functions such as scheduling or automatic control of exits by scenes, manual or automatic on/off.

Best
useIdeal for buildings that need reliable and stable control of electrical loads over wires (RS485) — hospitals, schools, offices, large homes, where a wireless network may not always be the best.
Suitable for attaching multiple relay keys away from the motherboard or controller, with fast and secure responses.

Installation and Durability
It is usually installed inside the electrical distribution panels or the appropriate boxes, it needs to be fed appropriately according to the outlet loads.
Output capacity, cooling efficiency, allowable distances for RS485 wires, and required electrical protection should be checked.

Key
AdvantagesRobust and stable enterprise control of loads via the wired RS485 link.
Supports multiple relay outputs to turn on or off multiple loads from a single device.
Seamless integration with Akubela HyPanel systems with the right setup in place.
Suitable for large projects or structures that require high-performance electrical control independent of wireless networks.
Customizable with scenes, scheduling, and centralized control.